Cam Roller / Cam Follower

361202-R Cam Roller Bearing | 15×40×11 mm | Single-Row Ball Design

15 mm Bore × 40 mm OD × 11 mm Width · Single-Row Balls · Pressed Steel Cage · Crowned Outer Ring · 2RSR NBR Seals · Grease-Filled · 100% Dimensionally Inspected

Request a Quote Send Bearing for Verification

Send us your part number, dimensions, drawing, or photo — we'll help confirm the correct specification before you order.

361202-R Cam Roller Bearing

The 361202-R is a single-row cam roller bearing with a 15 mm bore, 40 mm outside diameter, and 11 mm width. It is designed for cam-driven and track-guided mechanisms where a rotating roller runs against a cam or guide surface.

This EKB version uses a single-row ball design with a pressed steel cage. The outer ring has a crowned (convex) profile, which helps compensate for minor misalignment and reduces edge loading at the contact area.

The 2RSR configuration uses two black NBR (nitrile rubber) seals. The seal lips contact the inner ring shoulder — no gap is acceptable in this arrangement. The bearing is filled with grease at the factory.

Our 361202-R is an independently manufactured replacement bearing. The designation and reference number 14216224111124 are provided for identification and cross-reference purposes only.

Product Specifications

Note: Confirm the complete dimensions and technical specifications against the supplier's drawing before ordering or replacing an existing bearing.

Key Features

• Single-Row Ball Design
  The single-row ball arrangement provides the load-carrying design for this compact cam roller, within the bearing's design limits.

• Crowned Outer Ring
  The crowned (convex) outer ring profile helps compensate for minor misalignment and reduces edge loading where the roller contacts the cam or track surface.

• Pressed Steel Cage
  The pressed steel cage provides robust ball guidance in this cam roller design.

• 2RSR NBR Seals
  Two black NBR (nitrile rubber) seals protect the internal components. The seal lips contact the inner ring shoulder — no gap is acceptable in this arrangement.

• Grease-Filled
  The bearing is filled with grease at the factory for ready-to-fit operation.

• Specification-Based Replacement
  When replacing an existing 361202-R, check the complete dimensions and design rather than matching the model number alone. Differences in cage, sealing, or clearance may affect interchangeability.

Measured Dimensions & Quality Verification

Every 361202-R supplied by EKB is 100% dimensionally inspected before shipment.

The measured dimensions of each bearing are verified to be within the tolerance ranges specified by the national standard (GB/T). Actual measurement data and the dimensional drawing are available on request.

Measured Dimensional Drawing

Actual measured dimensions within GB/T standard tolerances · 100% inspected

Factory Quality Inspection Equipment

Our factory is equipped with 42 high-precision testing units — every bearing is measured before it leaves the plant.

Request the dimensional inspection report with your quotation, and we will provide the actual measured values for your reference.

Typical Applications

Cam rollers of this size are commonly used in:

• Cam-driven mechanisms

• Small conveying and indexing equipment

• Packaging machinery

• Textile and printing equipment

• Guide and support rollers in compact assemblies

• Other applications requiring a small crowned cam roller

Actual suitability depends on load, speed, temperature, shaft and housing fit, and the operating environment.

Dimensions and Replacement Compatibility

The basic dimensions of 361202-R are:

• Bore: 15 mm (0.591")

• Outside diameter: 40 mm (1.575")

• Width: 11 mm (0.433")

• Fillet radius: 0.6 mm (0.024")

Other important details include the crowned outer-ring profile, cage type, sealing arrangement, clearance, and lubrication.

A bearing with the same bore, outside diameter, and width is not necessarily an interchangeable replacement.

If you are replacing an existing bearing, please send the original part number, dimensional drawing, photographs, or a physical sample. EKB can help check the available specification before an order is placed.

Not sure which bearing you need? See our Bearing Identification Service.

Need a 361202-R Replacement?

EKB supports industrial buyers, maintenance teams, and bearing distributors sourcing cam rollers and other hard-to-find bearing products.

When contacting us, please include any information available:

• Original bearing number

• Required quantity

• Dimensions or technical drawing

• Equipment model or application

• Operating speed and load requirements, if known

• Required delivery schedule

We will check the requested configuration, availability, and lead time with the applicable product specifications.

Browse This Category

Looking for other support rollers or yoke-type track rollers? See our full range of Support Roller & Yoke Type Track Roller Bearings.

Related Guide

Track Roller Linear Guides: Two Needs for Lubrication

Learn how lubrication affects track-roller and support-roller assemblies, and why the correct lubrication arrangement extends service life.

About EKB

EKB Bearing is an integrated manufacturer and exporter of bearings. We combine our own 18,000 m² production facility — equipped with 13 automated production lines and 42 high-precision testing units — with our international sales team, and our bearings are exported to 66 countries. Our manufacturing facility operates under a formal ISO 9001:2015 quality management system (GB/T 19001-2016).

We support customers with difficult-to-source bearing requirements, including special-dimension, roller, inch-size, and replacement bearings.

From Our Factory

Orders are inspected, packed, and shipped directly from our own factory.

Frequently Asked Questions

What are the dimensions of 361202-R?
The dimensions are 15 mm bore × 40 mm outside diameter × 11 mm width, with a minimum fillet radius of 0.6 mm.

What type of bearing is 361202-R?
It is a cam roller bearing with a single-row ball design, pressed steel cage, and crowned outer ring.

What does 2RSR mean?
2RSR indicates two rubber seals. For this bearing, the seals are black NBR (nitrile rubber), and the seal lips contact the inner ring shoulder — no gap is acceptable.

Is 361202-R grease-filled?
Yes. The bearing is filled with grease at the factory.

Are the bearings 100% inspected?
Yes. Every 361202-R supplied by EKB is 100% dimensionally inspected before shipment, with measured values verified within national standard (GB/T) tolerances.

Can 361202-R replace another cam roller?
Not based on dimensions alone. Check the complete model designation, cage type, sealing, clearance, and application requirements before substitution.

How can I obtain a quotation?
Send EKB the model number, quantity, required delivery date, and any available drawings or photographs. We will confirm availability and lead time for the requested configuration.

Request a Quote

Looking for 361202-R or a replacement cam roller?
Send us your part number, dimensions, drawing, or product photo.
EKB will help check the specification and available supply options before you order.

Contact EKB for a Quotation