Special Dimension Deep Groove Ball Bearing

62322.2-2RS C3 Bearing | 22.2×56×21 mm | Bosch Alternator Replacement

22.2 mm Bore × 56 mm OD × 21 mm Width · 2RS · C3 · In Stock · Compatibility Verification Available

Request a Quote

Send us your original bearing number, dimensions, photo, or sample — we'll help confirm the correct replacement before you order.

Product Overview

The 62322.2-2RS C3 is a special-dimension deep groove ball bearing with a 22.2 mm bore, 56 mm outside diameter, and 21 mm width.

The bearing uses double rubber seals (2RS) and C3 internal clearance, making it suitable for applications where this specific dimensional and clearance configuration is required.

This size is commonly listed for automotive alternator applications, including Bosch 12V and 24V alternators. Public bearing references also list Bosch and NTN part numbers associated with the same 22.2 × 56 × 21 mm size.

Our 62322.2-2RS C3 is an independently manufactured replacement bearing. It is not manufactured, affiliated with, or endorsed by NTN or Bosch. Brand and OEM numbers are referenced only for identification and compatibility purposes.

Technical Specifications

What This Bearing Is

The 62322.2-2RS C3 is a special-dimension deep groove ball bearing measuring 22.2 × 56 × 21 mm.

Its 22.2 mm bore is not a common size in the standard 62/63-series bearing range, which is one reason this bearing is often specified by its exact dimensions or automotive cross-reference rather than by a common standard bearing number.

The 2RS sealing arrangement helps protect the bearing from external contaminants and retain internal lubricant.

The C3 clearance provides greater internal radial clearance than normal clearance. Whether C3 is appropriate depends on the shaft and housing fits, operating temperature, speed, and application conditions.

Typical Applications

• Automotive alternators

• Bosch 12V and 24V alternator drive-end applications

• Industrial electric motors

• Generators and rotating electrical equipment

• Maintenance and repair applications requiring a 22.2 × 56 × 21 mm bearing

Cross-Reference & Interchangeability

Commonly referenced part numbers associated with the 22.2 × 56 × 21 mm bearing size include:

These references are provided for identification and cross-reference purposes. Confirm the complete dimensions, sealing arrangement, clearance, and application before replacing the original bearing.

Need to Match an Existing 62322.2-2RS C3 Bearing?

For this type of special-dimension bearing, the part number alone is not always enough.

Send us any of the following:

• Original bearing number

• Bore, OD, and width

• Photo of the bearing marking

• Drawing

• Physical sample

• Alternator or equipment model

We'll check the dimensions, configuration, and cross-reference before shipment.

Don't have all the information? Send us whatever you have.
A photo, partial dimensions, or an old bearing sample may be enough for us to start the identification.

Before You Order

What does 62322.2-2RS C3 mean?
62322.2 identifies the bearing size configuration, while 2RS indicates double rubber seals and C3 indicates increased internal radial clearance compared with normal clearance.

Is this bearing used in Bosch alternators?
Yes. Public automotive bearing references list 62322.2-2RS C3 for Bosch 12V and 24V alternators, including several Bosch part numbers.

Can this bearing replace the NTN TM-623/22LLUA/22.2C3?
It may be a compatible replacement when the dimensions and configuration match.
The NTN number is a brand-specific designation, so the original bearing number, dimensions, and application should be checked before replacement.

Is this bearing suitable for high-temperature applications?
C3 provides increased internal clearance, which can help accommodate thermal expansion in suitable applications. However, the correct clearance depends on the complete bearing arrangement and operating conditions.

What if I don't know the exact bearing number?
Send us the old bearing, a photo, or the dimensions you can measure.
You do not need to know the exact replacement model before contacting us.

Why Buy From EKB?

Finding a replacement for a 22.2 mm bore bearing can be difficult because the size is not a common standard replacement in many distributor catalogs.

EKB focuses on difficult-to-source bearing requirements, including special-dimension, automotive, and OEM replacement bearings.

We help customers:
Identify → Check Dimensions → Cross-Reference → Confirm Availability

The goal is simple:
Help you buy the correct bearing the first time.

About EKB

EKB Bearing (Hebei Shuanghejincheng Bearing Co., Ltd.) operates an 18,000 m² factory with 13 automated production lines and 42 high-precision testing units, with products exported to 66 countries.

We support customers with bearing identification, replacement sourcing, dimensional verification, and special-dimension bearing requirements.

Frequently Asked Questions

What are the dimensions of 62322.2-2RS C3?
The dimensions are: 22.2 mm bore × 56 mm outside diameter × 21 mm width.

What is the difference between 62322.2-2RS and 62322.2-2RS C3?
The 2RS designation identifies double rubber seals. C3 indicates increased internal radial clearance compared with normal clearance.

What are the common Bosch references?
Commonly listed Bosch references include: 0120468028, 0120468054, 1120905035, and TM623-22LLUC3.

Can I send a sample for identification?
Yes. A physical sample, photograph, drawing, or partial dimensions can be used to start the identification and replacement process.

Need to Confirm 62322.2-2RS C3?

Send us: Part Number · Dimensions · Photo · Drawing · Sample
We'll confirm: Size · Configuration · Cross-Reference · Availability
Before you place the order.

Request a Quote